The micro-USB charging cable included with your Ultimate Ears Speaker is not waterproof. Once clean, allow the speaker to air dry completely before charging it. Wipe any excess cleaning solution off with a dry cloth. Wipe the rubber strap as well as the top and bottom caps. Or you can use disinfectant wipes.Īpply some cleaning solution to the microfiber cloth. You'll need a cotton or microfiber cloth and a common household cleaner, like isopropyl alcohol or window cleaner. Quickly rinse the soap off or wipe with a damp cloth. Wet a soft bristle brush with soapy water and lightly scrub the skin of your Ultimate Ears Speaker. Moisten the fabric on your Ultimate Ears Speaker with water using a water wand or spray bottle. Make sure your Ultimate Ears Speaker is turned off You'll need a water wand or a spray bottle, dish soap, and soft bristle brush. If your Ultimate Ears Speaker looks like it needs a pick me up after a few too many long nights and crazy adventures, try the following to renew it. It won’t enable you to use your speaker as an audio-output device when connected to a computer. IMPORTANT: The USB connection is solely for charging your MEGABOOM. NOTE: If a Bluetooth device is connected to the MEGABOOM while playing audio from an auxiliary connection, the Bluetooth device will take priority and the stream from the auxiliary device will stop. NOTE: Use only a 3-pole (non-microphone or inline remote cable) auxiliary cable. Connect the speaker to your Bluetooth device using a 3.5mm analog cable (not included).Turn the speaker on by pressing the power button on the top of the speaker.
You can pair additional devices with your speaker, see “Pairing additional Bluetooth devices with my MEGABOOM” This means your MEGABOOM is ready to use. Once paired and connected, you’ll hear an audible confirmation from the speaker. NOTE: MEGABOOM volume is set to maximum when you pair it to an iOS device for the first time.
0 kommentar(er)
